Developer Home Contents Search Feedback Support Intel(r)


4/8/16 Mbyte- 1/2/4 Mx32- 26-1001-XX Series

Tanisys Technology, Inc.


Architecture:
Type :
Last Update:

Flash Memory Components FlashFile(TM) Memory
SIMMs
8/23/96 10:14:00 AM

Vendor Information



Tool Description:

The 1st TECH 26-1001-XX family of 80 pin Flash Memory SIMM modules provide compact industry standard non-volatile memory in modular upgradable form. The series includes 4, 8 and 16 Mbyte versions, each utilizing the latest in Intel Flash memory technology. The entire series is designed to generate on-board programming voltages or to allow the user to provide 12V at the card edge. Additionally this series provides a reset signal to protect data during power transitions, or it can utilize an externally applied reset signal.
The modules are organized as 1MBx32, 2MBx32 and 4MBx32 and can access data in either 90 or 120ns.
All modules in this family are fabricated with eight layer printed circuit board (PCB) substrate construction and low-ESR decoupling capacitors for high reliability and low noise.

Tool Features:

  • JEDEC-Standard 80 pin flash SIMM module

  • Utilizes Intel FlashFileT memory devices

  • Fast 90 or 120ns read access time

  • 5V operation (+/- 10%)

  • Does not require separate programming voltage

  • Built-in write-protect reset during power changes (versions available for user-supplied reset signal)

  • Compact design - 1.25 inch height

  • TTL-compatible inputs and outputs

  • Low 550mW operating power (typical)

  • Ceramic decoupling capacitors at each flash device
  • File Attachments:

    Supported Device Detail Matrix:

    Part & Package

    28F008SA/SA-L - TSOP-40 ld



    Vendor Information:


    Tanisys Technology, Inc.

    12201 Technology Boulevard, Suite 130
    Austin , TX 78727
    USA
    (512) 258-3570

    Email : firstech@mail.eden.com
    Fax : (512) 258-3689

    Contact the vendor above for the latest Distributor information




    * Legal Information © 1998 Intel Corporation